[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/29/2016 5:10:37 PM Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] AUX Use a portable audio player 1 Connect a portable audio player (commercially available). 5 mm stereo mini plug with “L” shaped connector (commercially available) IF BAND MONO SET NEWS SET*2 REGIONAL*2 AF SET*2 Auxiliary input jack Portable audio player 2 Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/R&B/TALK/ USER/VOCAL BOOST/BASS BOOST/CLASSICAL/DANCE Adjust your own sound settings. Preset equalizer: FLAT (default), DRVN 3, DRVN 2, DRVN 1, HARD ROCK, HIP HOP, JAZZ, POP, R&B, TALK, USER, VOCAL BOOST, BASS BOOST, CLASSICAL, DANCE EASY EQ PRO EQ Store your own sound settings 1 Press and hold to enter EASY EQ setting. 2 Turn the volume knob to select an item (see the following table), then press the knob. ( 10) 3 Repeat step 2 until the desired item is selected/activated or 4 Press follow the instructions stated on the selected item. W LEVEL*4 LEVEL 01/LEVEL 02: Boosts low or high frequencies to produce a wellbalanced sound at low volume. W +03): Adjusts the output level of the subwoofer connected via speaker lead. W 00): Adjusts the output level of the subwoofer connected to the lineout terminals (REAR/SW) through an external amplifier. EXPANDER ON: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in (Digital Track audio data compression. Expander) SPK/PRE OUT Depending on the speaker connection method, select the appropriate setting to get the desired output. (  Speaker output settings) PRE-OUT*6 Speaker output settings Select the output setting for the speakers [SPK/PRE OUT], base on the speaker connection method. SUBWOOFER LPF*4 FRQ THROUGH: All signals are sent to the subwoofer ; FRQ 55HZ/FRQ 85HZ/FRQ 120HZ: Audio signals with frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. W PHASE*4 REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [FRQ THROUGH] is selected for [SUBWOOFER LPF]. LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level). € Remove burrs from the center hole and disc edge before inserting a disc. Flac) • Playable disc media: CD-R/CD-RW/CD-ROM • Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name • Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device. € Discs with coloring on the recording surface or discs that are dirty. About USB devices • You cannot connect a USB device via a USB hub. € Connecting a cable whose total length is longer than 5 m may result in abnormal playback. € This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A. [. . . ] If the maximum power of the speakers is lower than 50 W, change the [AMP GAIN] setting to avoid damaging the speakers. € If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. € After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. € If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating. [. . . ]